0

increase u r browsing speed - method 1

Incerase u r browsing speed by the following procedure.

TO Goto > My computer > Properties > Hardware > Devicemanager > PORTS > COMMUNICATION > Right click on it and go to Properties > PORT SETTINGS > ,now change the BITS PER SECOND128000 AND FLOW CONTROL TO HARDWARE AND AND now press ok.
0

increase u r browsing speed - method 2

hi friends,


1. Go to Start-> Run-> and type gpedit.msc
2. Expand the Administrative Templates branch
3. Expand the Network tab
4. Highlight QoS Packet Scheduler
5. Click on Limit Reservable Bandwidth and check the enabled box
6. Then Change the Bandwidth limit % to 0 %

Once you have done this click apply and restart your PC. After rebooting you should see a noticeable improvement in your net speed.
0

Your Name as Wallpaper

Do u need u r name as to be as a wall paper in your mobile,here it is go to this site and enjoy


www.reddodo.com

0

HIDDEN PROGRAMS IN WINDOWS XP

Programs :

1. Private Character Editor :
Used for editing fonts,etc.

** start>>Run
** Now, type eudcedit



2. Dr. Watson :
This an inbuilt windows repairing software !

** start>>Run
** Now, type drwtsn32



3. Media Player 5.1 :
Even if you upgrade your Media Player, you can still access your old player in case the new one fails !!!

** start>>Run
** Now, type mplay32



4. iExpress :
Used to create Setups

You can create your own installers !

** start>>Run
** Now, type iexpress

0

make a folder named con....

here is how you can do it !!

1. Go to RUN, type cmd. go to desktop path if u need, just type: md .\con\

you will find the con folder in desktop.

or

right click on desktop, select newfolder, hold alt key & press 255 in numeric keypad & now type the CON or PRN etc

it will create for you..CON means Console...these are reservered ports...

2. another method to make a folder named con etc.

just create a folder rename it click
alt + 1060 keep pressing on by one on numeric

then write con

3. use dis command :

c:>mkdir \\.\c:\con


PLEASE DONT ASK ME...HOW TO DELETE IT ...
0

Access Your Folders as Drives

trick is all About :

You can create Virtual Drives in your Computer. Now you can access your Favorite Folders as a drive in My Computer.

What you can do ?

** Access your folders as a Drive !

** Fool 'Computer Beginners' or your 'Friends' (Non-Expert) , as the drive will show Disk Space of the folder's drive so it seems that the disk space has increased !!!

Do The Follwing :

Start >> Run

Type cmd and hit Enter

This will open "Command Prompt"

Type subst Z: E:\folder and hit Enter key.

You can replace Z: with your desired New Drive Letter (Except existing Drive letters)!

You can replace E:\folder with the path of your favorite folder !

Now, type exit

*** This creates a new drive ! When you open this , it will open your folder !!!

*** Isn't it Awesome ?

-------------------------------------------------------------

But a Problem !

۩ On Restart the Virtual Drive Disappears !!!

-------------------------------------------------------------

Solution !

-------------------------------------------------------------

۩ We can make a batch file which will make the drive everytime on startup !

Here is how ?

Open Notepad

Type :

@ECHO OFF

subst Z: E:\folder

exit

File >> Save As...

Name it : Virtual Drive Emulator.bat

Start >> All Programs

Right Click on Startup >> Open

This open the Startup folder

Paste the Virtual Drive Emulator.bat file here !

*** That's all , now the drive will automatically be created when ever you start your pc

-------------------------------------------------------------

>>>> Mission Accomplished <<<<


0

DISK PARTITIONING


FDISK.EXE is a DOS based command line driven Microsoft partitioning utility. Its purpose is to display boot, disk and partition information, modify existing partitions, create new ones and/or delete the ones you want on all installed fixed hard disk(s), but ONLY WITH COMPLETE DATA LOSS!
run one of these commands from any DOS prompt:
FDISK /?
or:
HELP FDISK
to display the FDISK.EXE help screen.

HIDDEN PARAMETERS
Hidden parameter are not documented by Microsoft and is find by users threw experiments.

1) FDISK /FPRMT :
FDISK /FPRMT bypasses the FDISK startup screen, but enables interactive FAT16/FAT32 support. This can be used to force FDISK to create FAT32 partitions smaller than 512 MB, normally not possible by default.
2) FDISK /MBR :
FDISK /MBR recreates the boot sector of the first (bootable) hard disk overwriting it with a fresh copy, by writing a new Master Boot Record (MBR) based on existent disk structure, without altering the partition table information.
Can be used to repair a damaged/corrupted MBR (i.e. by a virus).
3) FDISK /ACTOK :
FDISK /ACTOK skips disk integrity checking, thus speeding up the partitioning process.
4) FDISK /PARTN :
FDISK /PARTN saves the partition information to a plain text file called PARTSAV.FIL, which can be viewed afterwards using any text editor/viewer, like EDIT.COM in DOS or Notepad in Windows.

Formatting Partitions

FORMAT.COM is an external MS-DOS command, located by default in C:\Windows\Command
Hidden Parameter :
Hidden parameter are not documented by Microsoft and is find by users threw experiments.

1) FORMAT /AUTOTEST :
FORMAT /AUTOTEST checks for the existing format of your disk, unless the /U (UNCONDITIONAL) parameter is also used, and then proceeds with an UNATTENDED DISK(ETTE) FORMAT:

DOES NOT prompt for a volume label!
DOES NOT prompt to format another disk(ette)!
NO delay: NO user intervention!
Ends WITHOUT pausing!
After completion, it DOES display disk space statistics.
0

Sony Ericsson Secret Codes

1.Sony Ericsson Secret Menu: -> * <- <- * <- *
(-> means press joystick, arrow keys or jogdial to the right and <- means left.)
You'll see phone model, software info, IMEI, configuration info, sim lock status, REAL time clock, total call time and text labels.
You can also test your phones services and hardware from this menu (main display, camera, LED/illumination, Flash LED, keyboard, earphone, speaker, microphone, radio and vibrator tests)

2.IMEI Number: *#06#

3.Lockstatus: <- * * <-

4.Shortcut to last dialed numbers: 0#

5.Shortcut to sim numbers: On main menu type a number and press #

6.If you change the language from default to any other language, then it may be difficult to switch to default language. The shortcut is very simple. Just press <> . <> stands for right arrow button or joystick.
0

Tips on Mobile Maintenance

Looking after your mobile helps to ensure it has a long and productive life. There are 7 easy maintenance tips to help you get the best out of your mobile phone. All of the points below should also apply to your battery, charger and any other accessories.

KEEP YOUR MOBILE:
1. Charged: Ensure your battery is fully charged, and then completely run it down before recharging. Recharging too early causes your battery to run out of power more quickly.
2. Secure: For security reasons, enable the PIN on your SIM Card and Phone-lock on your phone to avoid unauthorized used. These security checks will also be activated when the phone is power cycled. You can check with your carrier or the phone manual for the features and also for information on blocking your SIM card and phone IMEI number if the phone is stolen. For more information please see the Security Tips located on the AMTA Lost and Stolen website.
3. Protected: Make sure you use a keypad lock to lock your phone. Unplanned calls can cost a fortune and even though your phone may be in a safe place, such as in a bag, your phone will still get knocked around to a surprising degree. Rough treatment can damage electronic circuit boards so avoid dropping or unnecessarily shaking your phone.
4. Battery: Be safe with your batteries. Use only genuine batteries from your phone manufacturer and only buy from authorized dealers. Going for the cheap option of a counterfeit battery can be dangerous.
5. Clean: Don't use harsh detergents, cleaning solvents or harsh chemicals to clean your phone. Wipe only with a soft cloth.
6. Covered: a protective cover will help repel dust and dirt, and prevent scratches. Make sure the cover you choose is of good quality. Low quality covers with no air pockets can damage you phone by creating humidity inside the cover.
7. Storing your phone: Always store your phone in a dry place. Avoid rain, high humidity and liquids. All of these may contain minerals that could corrode the electron
0

Different ways to turn off your PC


There are so many different ways to turn off your Windows XP computer, let's look at some of them:


1. The standard approach - click the Start Button with your mouse, then select the Turn Off menu and finally click the Turn Off icon on the Turn Off computer dialog. blink.gif

2. Press Ctrl+Esc key or the Win key and press u two times - the fastest approach.

3. Get the Shutdown utility from Download.com - it add the shut down shortcuts for you. Else create them yourself using approach 4.

4. Create a shutdown shortcut on your desktop. Right click on the desktop, choose New Shortcut and type shutdown -s -t 00 in the area where you are asked to specify the location of the program file. Now you can just double click this icon to turn off the computer. The best location would be your quick launch bar.

5. Press the Win key + R key to open the run window. Type shutdown -s -t 00. [s means shutdown while t means the duration after which you want to initiate the shutdown process].

If some open processes or application won't let you turn off, append a -f switch to force a shut down by closing all active processes.



6. Win+M to minimize all windows and then Alt+F4 to bring the Turn Off computer dialog.

7. Open Windows Task manager (by right clicking the Windows Task bar or Alt+Ctrl+Del) and choose Shut down from the menu. Useful when the Windows are not responding.


8. open task manager--->click on shutdown--->hold the ctrl key and click on Turn off::::::: pc will be turned off in 3 secs.. fastest method other than hard shutdown

0

watch movies online

You Can Watch Online Movies From:

http://movies.nabolister.com/

http://www3.alluc.org/alluc/

http://www.plentyofvids.com/

http://www.onlinehorrorguide.com/

http://www.ultravid.blogspot.com/

http://alltimehitmovies.blogspot.com/

http://www.movieplex.org/

http://onclickvideos.com/

http://www.freemediatv.com/

http://www.moviefather.com/

http://www.davidmovie.com
0

Can't view hidden files and folders?

Symptoms

  1. You can't see hidden files and folders, even if you try modifying registry.
  2. Whenever you double click on drive icon on My Computer, it takes some time to open and always opens in new window.
  3. Your PC becomes a little slower.
  4. The Process is packed and/or encrypted using a software packing process
  5. This Process Creates Other Processes On Disk
  6. This Process Deletes Other Processes From Disk
  7. Loads and Executes a System Driver File
  8. Writes to another Process's Virtual Memory (Process Hijacking)
  9. Registers a Dynamic Link Library File
  10. The Process is polymorphic and can change its structure
  11. Violates Prevx File Security Settings
  12. Executes a Process
  13. Adds a Registry Key (RUN) to auto start Programs on system start up
  14. The process hooks code into all running processes which could allow it to take control of the system or record keyboard input, mouse activity and screen contents
  15. Modifies Windows Initialization And System Settings Used On Start up
Causes
  1. This problem can be a caused by a backdoor/Trojan amvo.exe
  2. amvo.exe is bundled with several other worms/files some of them are
    1. 80avp08.com
    2. dosocom.com
    3. usdeiect.com
    4. xfoolavp.com
    5. autorun.inf
    6. Nideiect.com
    7. u.bat etc..
  3. These files are stored on the directories i.e. C:\, D:\ etc. and also on C:\windows\system32\amvo.exe
  4. You wouldn't be able to delete any of these files. Not even in Safe mode because it adds a autorun registry which loads amvo on boot.
Solution

  1. KILL all the processes like AMVO.exe or AVPO.exe
  2. Type "msconfig" without quote in run and press Enter.
    1. Go to startup tab and uncheck any entry on amvo.
  3. Type "cmd" without quote in run
    1. type "d:" and then press Enter
    2. type autorun.inf and then press Enter
    3. a file will open in notepad. this would have the name of the .exe/.bat/.com file in it, which is mounted at the boot time.
  4. Type "regedit" without quote in run and press Enter.
    1. Press Ctrl+F and type amvo, do the search again and again and delete all the related entries.
    2. Press Ctrl+F and type u.bat, do the search again and again and delete all the related entries.
    3. Press Ctrl+F and type amva, do the search again and again and delete all the related entries. Generally it should be HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shared Tools\MSConfig\startupreg\amva
    4. search for the registry of file name which was entered in autorun.inf and delete all entries.
Now restart the computer. and do the followings
  1. Go to regedit and then HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer \Advanced\Folder\Hidden\SHOWALL
  2. Double click on the entry called CheckedValue and replace the 0 with 1.
  1. Now Close all the windows and Press Ctrl+E to open the explorer.
  2. Enable the hidden option from the folder options.
  3. Delete all the malicious files as mentioned above.
  4. Your computer is now trojan free.
  5. Find all the amvo related files and delete them. (some of them are amvo0.dll, amvo1.dll etc.)
Prevention

Generally this Trojan travels through a USB drive. so better explorer USB drive rather than opening it.
0

Change IE Title Bar Text

Steps to be followed

  • go to [Start] [Run] [Regedit]
  • navigate to Registry Key: HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Main
  • then Modify/Create the Value Name [Window Title] according to the Value Data listed below.
  • set Data Type: REG_SZ [String Value] // Value Name: Window Title
  • enter Value Data: [Enter The Text Desired In Title Bar]
  • Exit Registry and Reboot
0

How to connect your nokia phone to nokia pc suite automatically.

Follow the steps given below for the automatic connection your nokia phone to pc suite:

1. First activate or switch on the bluetooth on your mobile phone.

2. Now start your pc suite at your computer with bluetooth dongle connected at the usb port 3. In nokia pc suite click on manage connections and connect your phone.

4. After connecting set your computer as authorized connection or in other words you can set allow auto connection no confirmation option as yes.

For Example: Nokia 5300 (s40)

1. Open bluetooth menu via settings>>connectivity>>paired devices

2. Click options and select pair a new device.

3. Search for your computer and select it and go to options>>Auto-conn., no conf. now select yes.

4. Exit from bluetooth options and you are done.

Next time when you open nokia pc suite and switch on bluetooth on your nokia phone they will get automatically connected in seconds